Bhautik

RO Membrane Cleaning Chemicals

Complete Guide to RO Membrane Cleaning Chemicals for Water Treatment

Leave a Comment / Latest News & Updates / By

Your reverse osmosis (RO) system delivers pristine water until performance suddenly drops. Flow slows. Water quality dips. That’s when RO membrane cleaning chemicals become your best asset or your costliest mistake if chosen wrong.​ Membrane fouling isn’t just annoying; it’s expensive. The cost per membrane cleaning cycle varies based on system size, chemical selection, and

Complete Guide to RO Membrane Cleaning Chemicals for Water Treatment Read More »

RO vs UF Membranes

RO vs UF Membranes: Complete Technical Comparison

Leave a Comment / Latest News & Updates / By

RO membranes have pore sizes of ~0.0001 µm and remove dissolved salts, heavy metals, and ions, best suited for desalination and high-purity water production. UF membranes have pore sizes of 0.01–0.1 µm and remove bacteria, viruses, and suspended solids while retaining minerals. For Indian industries, the right choice depends on your feedwater TDS, output purity

RO vs UF Membranes: Complete Technical Comparison Read More »

PVA GEL for wastewater treatment

PVA Gel for Wastewater Treatment: Complete Industrial Guide 2026

Leave a Comment / Latest News & Updates / By

Quick summary: PVA gel for wastewater treatment is a polyvinyl alcohol hydrogel biocarrier that immobilises bacteria inside 4mm porous beads. It delivers up to 92% COD removal, handles 2–5 times the BOD load of conventional activated sludge, and produces 80% less excess sludge. Developed by Kuraray (Japan), it is now widely used in STPs, ETPs,

PVA Gel for Wastewater Treatment: Complete Industrial Guide 2026 Read More »

antiscalant for ro plants

Best Antiscalant for RO Systems: Selection Guide, Dosing & Performance Data

Leave a Comment / Latest News & Updates / By

The best antiscalant for an RO system depends on your feed water chemistry, the dominant scale type, and your target recovery rate. For most industrial brackish water plants, broad-spectrum phosphino-carboxylate blends like the ROPUR RPI antiscalant series handle CaCO₃, CaSO₄, BaSO₄, silica, and iron at just 2–5 ppm dosing. But picking the wrong product? That’s

Best Antiscalant for RO Systems: Selection Guide, Dosing & Performance Data Read More »

Water Treatment Membranes Guide

Water Treatment Membranes: Types, Applications & How to Choose

Leave a Comment / Latest News & Updates / By

Water treatment membranes are semi-permeable barriers that separate contaminants from water through pressure-driven filtration. The four primary types of microfiltration (MF), ultrafiltration (UF), nanofiltration (NF), and reverse osmosis (RO)filter particles ranging from 10 microns down to 0.0001 microns.  These membrane filtration systems are used across industries for water purification, wastewater recycling, and desalination. Introduction The

Water Treatment Membranes: Types, Applications & How to Choose Read More »

Scroll to Top